XBMC image for wandboard dual


Following several requests, I have just prepared an XBMC image which should work on wandboard dual.

How to install

Please have a look at XBMC on wandboard post.
Instructions are the same except :

  • You have to replace the filename wand.bin by wand_dual.bin
  • You have to connect a serial cable on db9 and to hit ESC on first boot. On uboot prompt, you have to type
set bootcmd ‘mmc dev 2; mmc read ${loadaddr} 0×800 0×1200; bootm’
set bootargs 'console=ttymxc0,115200 root=/dev/mmcblk0p1 rootwait ro video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24 rootwait'
run bootcmd

This specific step is required only once

NB : This post has just been updated on the 24th of July (and the image has also been updated.) Please Download again the image and check that the md5sum is df9b68ae2dc7342320018327d10774ff