distccd running on utilite image

[Will]

I’ve been (mostly) enjoying my Utilite Pro (I have the quad-core model with the 32GB SSD onboard) with your custom Yocto image.

I noticed that distccd is running and included with the image I built. I’m not sure if that’s supposed to be the default with the image I build per your instructions, Stephan? If so, is there any reason? 🙂

Here’s the output from ps auxww below:

root@utilite:~# ps axuww
USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND
root 1 0.0 0.0 1692 576 ? Ss 19:02 0:01 init [5]
root 2 0.0 0.0 0 0 ? S 19:02 0:00 [kthreadd]
root 3 0.0 0.0 0 0 ? S 19:02 0:04 [ksoftirqd/0]
root 6 0.0 0.0 0 0 ? S 19:02 0:00 [migration/0]
root 7 0.0 0.0 0 0 ? S 19:02 0:00 [migration/1]
root 8 0.0 0.0 0 0 ? S 19:02 0:01 [kworker/1:0]
root 9 0.0 0.0 0 0 ? S 19:02 0:00 [ksoftirqd/1]
root 10 0.0 0.0 0 0 ? S 19:02 0:00 [migration/2]
root 12 0.0 0.0 0 0 ? S 19:02 0:00 [ksoftirqd/2]
root 13 0.0 0.0 0 0 ? S 19:02 0:00 [migration/3]
root 14 0.0 0.0 0 0 ? S 19:02 0:00 [kworker/3:0]
root 15 0.0 0.0 0 0 ? S 19:02 0:00 [ksoftirqd/3]
root 16 0.0 0.0 0 0 ? S< 19:02 0:00 [cpuset]
root 17 0.0 0.0 0 0 ? S< 19:02 0:00 [khelper]
root 21 0.0 0.0 0 0 ? S< 19:02 0:00 [netns]
root 288 0.0 0.0 0 0 ? S 19:02 0:00 [sync_supers]
root 290 0.0 0.0 0 0 ? S 19:02 0:00 [bdi-default]
root 292 0.0 0.0 0 0 ? S< 19:02 0:00 [kblockd]
root 323 0.0 0.0 0 0 ? S< 19:02 0:00 [ata_sff]
root 327 0.0 0.0 0 0 ? S< 19:02 0:00 [imx6q-ecspi.0]
root 331 0.0 0.0 0 0 ? S< 19:02 0:00 [imx6q-ecspi.1]
root 340 0.0 0.0 0 0 ? S 19:02 0:00 [khubd]
root 360 0.0 0.0 0 0 ? S 19:02 0:00 [ipu1_task]
root 361 0.0 0.0 0 0 ? S 19:02 0:00 [ipu1_task]
root 362 0.0 0.0 0 0 ? S 19:02 0:00 [ipu2_task]
root 363 0.0 0.0 0 0 ? S 19:02 0:00 [ipu2_task]
root 373 0.0 0.0 0 0 ? S< 19:02 0:00 [l2cap]
root 459 0.0 0.0 0 0 ? S< 19:02 0:00 [rpciod]
root 468 0.0 0.0 0 0 ? S 19:02 0:00 [usb_wakeup thre]
root 470 0.0 0.0 0 0 ? S< 19:02 0:00 [otg_switch]
root 474 0.0 0.0 0 0 ? S 19:02 0:00 [usb_wakeup thre]
root 485 0.0 0.0 0 0 ? S 19:02 0:00 [kswapd0]
root 486 0.0 0.0 0 0 ? S 19:02 0:00 [fsnotify_mark]
root 487 0.0 0.0 0 0 ? S< 19:02 0:00 [nfsiod]
root 489 0.0 0.0 0 0 ? S< 19:02 0:00 [crypto]
root 1062 0.0 0.0 0 0 ? S 19:02 0:00 [kapmd]
root 1124 0.0 0.0 0 0 ? S 19:02 0:00 [scsi_eh_0]
root 1135 0.0 0.0 0 0 ? S 19:02 0:00 [mtdblock0]
root 1140 0.0 0.0 0 0 ? S 19:02 0:00 [mtdblock1]
root 1145 0.0 0.0 0 0 ? S 19:02 0:00 [mtdblock2]
root 1180 0.0 0.0 0 0 ? S 19:02 0:01 [kworker/1:1]
root 1199 0.0 0.0 0 0 ? S 19:02 0:00 [irq/257-rtc-em3]
root 1232 0.0 0.0 0 0 ? S< 19:02 0:00 [vpu_wq]
root 1237 0.0 0.0 0 0 ? S< 19:02 0:00 [galcore workque]
root 1239 0.0 0.0 0 0 ? S 19:02 0:00 [Vivante Kernel ]
root 1240 0.0 0.0 0 0 ? S 19:02 0:00 [Vivante Kernel ]
root 1241 0.2 0.0 0 0 ? S 19:02 0:22 [galcore daemon ]
root 1242 0.0 0.0 0 0 ? S 19:02 0:00 [galcore daemon ]
root 1243 0.0 0.0 0 0 ? S 19:02 0:00 [galcore daemon ]
root 1263 0.0 0.0 0 0 ? S 19:02 0:03 [kworker/3:1]
root 1323 0.0 0.0 0 0 ? S< 19:02 0:00 [krfcommd]
root 1360 0.0 0.0 0 0 ? S 19:02 0:03 [kinteractiveup]
root 1361 0.0 0.0 0 0 ? S 19:02 0:00 [jbd2/sda2-8]
root 1362 0.0 0.0 0 0 ? S< 19:02 0:00 [ext4-dio-unwrit]
root 1365 0.0 0.0 0 0 ? S 19:02 0:00 [scsi_eh_1]
root 1366 0.6 0.0 0 0 ? S 19:02 1:05 [usb-storage]
root 1376 0.0 0.0 1712 448 ? S 19:02 0:00 /usr/bin/psplash –angle 0
root 1395 0.0 0.0 9092 1272 ? Ss 19:02 0:00 /lib/systemd/systemd-udevd -d
root 1422 0.0 0.0 0 0 ? S 19:02 0:00 [irq/303-ads7846]
root 1453 0.0 0.0 0 0 ? S 19:02 0:00 [ksdioirqd/mmc0]
root 1460 0.0 0.0 0 0 ? S< 19:02 0:00 [cfg80211]
root 1618 0.0 0.0 0 0 ? S 19:02 0:00 [btmrvl_main_ser]
root 1619 0.0 0.0 0 0 ? S< 19:02 0:00 [hci0]
root 1620 0.0 0.0 0 0 ? S< 19:02 0:00 [MWIFIEX_WORK_QU]
root 1621 0.0 0.0 0 0 ? S< 19:02 0:00 [cfg80211_wq]
root 1653 0.0 0.0 0 0 ? S 19:02 0:00 [jbd2/sdb1-8]
root 1654 0.0 0.0 0 0 ? S< 19:02 0:00 [ext4-dio-unwrit]
root 1763 0.0 0.0 2204 60 ? Ss 19:02 0:00 udhcpc -R -n -p /var/run/udhcpc.eth0.pid -i eth0
root 1780 0.0 0.0 2228 512 ? Ss 19:02 0:00 /usr/sbin/rpcbind
999 1802 0.0 0.0 2892 1072 ? Ss 19:02 0:00 /usr/bin/dbus-daemon –system
root 1812 0.0 0.0 2264 496 ? Ss 19:02 0:00 /usr/sbin/dropbear -r /etc/dropbear/dropbear_rsa_host_key -p 22 -B
root 1815 0.0 0.0 1720 476 ? Ss 19:02 0:00 /usr/sbin/apmd -P /etc/apm/apmd_proxy –proxy-timeout 30
distcc 1821 0.0 0.0 3096 312 ? SNs 19:02 0:00 /usr/bin/distccd –pid-file=/var/run/distcc.pid –daemon –allow 192.168.7.0/24
distcc 1822 0.0 0.0 3096 152 ? SN 19:02 0:00 /usr/bin/distccd –pid-file=/var/run/distcc.pid –daemon –allow 192.168.7.0/24
root 1834 0.0 0.0 3212 1156 ? Ss 19:02 0:01 /usr/bin/ntpd -p /var/run/ntp.pid -g
root 1839 0.0 0.1 12744 2876 ? Ss 19:02 0:00 /usr/sbin/smbd
root 1841 0.0 0.0 6940 1560 ? Ss 19:02 0:01 /usr/sbin/nmbd
root 1846 0.0 0.0 2204 572 ? S 19:02 0:00 /sbin/syslogd -n -O /var/log/messages
root 1848 0.0 0.0 2204 568 ? S 19:02 0:00 /sbin/klogd -n
root 1852 0.0 0.0 12792 828 ? S 19:02 0:00 /usr/sbin/smbd
avahi 1856 0.0 0.0 3388 1332 ? S 19:02 0:00 avahi-daemon: running [utilite.local]
avahi 1857 0.0 0.0 3256 328 ? S 19:02 0:00 avahi-daemon: chroot helper
root 1859 0.0 0.0 3876 992 ? S 19:02 0:00 /usr/bin/oprofile-server
root 1863 0.0 0.2 36704 5020 ? Ssl 19:02 0:01 /usr/sbin/NetworkManager
root 1866 0.0 0.1 89404 3352 ? Sl 19:02 0:01 /usr/bin/tvheadend -l /dev/null
root 1867 29.5 4.9 1135424 98408 ? Sl 19:02 49:24 /imx6/xbmc/lib/xbmc/xbmc.bin
root 1871 0.0 0.0 2208 608 ttymxc3 Ss+ 19:02 0:00 /sbin/getty 115200 ttymxc3
root 1872 0.0 0.0 2208 608 tty1 Ss+ 19:02 0:00 /sbin/getty 38400 tty1
polkitd 1875 0.0 0.3 72792 6868 ? Sl 19:02 0:00 /usr/lib/polkit-1/polkitd –no-debug
distcc 1883 0.0 0.0 3096 152 ? SN 19:02 0:00 /usr/bin/distccd –pid-file=/var/run/distcc.pid –daemon –allow 192.168.7.0/24
root 1889 0.0 0.1 25616 3592 ? Sl 19:02 0:00 /usr/lib/upower/upowerd
distcc 1931 0.0 0.0 3096 152 ? SN 19:02 0:00 /usr/bin/distccd –pid-file=/var/run/distcc.pid –daemon –allow 192.168.7.0/24
distcc 1939 0.0 0.0 3096 152 ? SN 19:02 0:00 /usr/bin/distccd –pid-file=/var/run/distcc.pid –daemon –allow 192.168.7.0/24
root 1952 0.0 0.0 4880 1756 ? S 19:02 0:00 /usr/sbin/wpa_supplicant -u
root 1955 0.0 0.1 6100 3436 ? S 19:02 0:00 /sbin/dhclient -d -sf /usr/lib/networkmanager/nm-dhcp-client.action -pf /var/run/dhclient-eth0.pid -lf /var/lib/NetworkManager/dhclient-681b428f-beaf-8932-dce4-687ed5bae28e-eth0.lease -cf /var/lib/NetworkManager/dhclient-eth0.conf eth0
distcc 1985 0.0 0.0 3096 152 ? SN 19:02 0:00 /usr/bin/distccd –pid-file=/var/run/distcc.pid –daemon –allow 192.168.7.0/24
distcc 1990 0.0 0.0 3096 152 ? SN 19:02 0:00 /usr/bin/distccd –pid-file=/var/run/distcc.pid –daemon –allow 192.168.7.0/24
root 2597 0.0 0.0 0 0 ? S 19:14 0:00 [kworker/u:0]
root 2664 0.0 0.0 0 0 ? S 20:58 0:00 [kworker/2:2]
root 2673 0.0 0.0 0 0 ? S 21:16 0:00 [kworker/u:1]
root 2676 0.0 0.0 0 0 ? S 21:16 0:00 [flush-8:0]
root 3254 0.0 0.0 2592 992 ? Ss 21:22 0:00 /usr/sbin/dropbear -r /etc/dropbear/dropbear_rsa_host_key -p 22 -B
root 3255 0.0 0.0 2996 1648 pts/0 Ss 21:22 0:00 -sh
root 3310 0.0 0.0 0 0 ? S 21:37 0:00 [kworker/2:0]
root 3311 0.0 0.0 0 0 ? S 21:38 0:00 [kworker/0:0]
root 3335 0.0 0.0 0 0 ? S 21:44 0:00 [kworker/0:1]
root 3336 0.0 0.0 0 0 ? S 21:45 0:00 [kworker/u:2]
root 3342 0.0 0.0 0 0 ? S 21:48 0:00 [kworker/2:1]

[stephan]

hi will

yes the distcc has leaked when I added dev stuff (native gcc and so on..) : you can safely remove/disable that stuff of course 😉

[Author]

Posts